Golf Simulator Installers in Colorado

Local and regional installers

National and multi-state installers serving Colorado

Listings are not ranked or rated and nothing here is paid placement. Each listing is checked against the company's own website. Confirm service area and pricing with each company.

Who installs in Colorado, and where

We found 3 local or regional companies whose own sites say they install golf simulators in Colorado. Discrete Integrations (Morrison, CO) lists Denver metro. Aurum Home Tech (Denver area, CO) lists Denver, Boulder, Cherry Hills Village, Greenwood Village. Native Design Build (Fort Collins, CO) lists Fort Collins area.

National or multi-state firms with a Colorado page: 19th Hole Golf Simulators, Assembled Golf, Virtual Tee. Their Colorado pages name Colorado Springs / Pikes Peak; Denver; Denver metro; Select markets incl. Colorado (per site). Templated city pages without a local address are counted as national, not local.

Colorado towns and regions named by installers

Places named on the installers' own Colorado pages, and who names them (a company not listed for your town may still cover it; ask):

• Denver: Assembled Golf, Aurum Home Tech, Discrete Integrations, Virtual Tee
• Boulder: Aurum Home Tech
• Cherry Hills Village: Aurum Home Tech
• Colorado: 19th Hole Golf Simulators
• Colorado Springs: Assembled Golf
• Fort Collins: Native Design Build
• Greenwood Village: Aurum Home Tech
• Pikes Peak: Assembled Golf

Of the 7 companies on this page, 3 are based in Colorado; 4 are national or multi-state companies. Launch monitor and enclosure brands named on their Colorado pages include Foresight Sports, TrackMan, TruGolf, Uneekor; only brands a company states are shown on its card.

Colorado weather and the indoor season

Colorado's season is shaped by altitude. NOAA's summary reports that the high mountains receive 150 to more than 400 inches of snow a year and that the state has stayed warmer than its long-term average since 1998 (NOAA NCEI State Climate Summary). Denver-area installers frame the case the same way: Discrete Integrations says on its Denver page that Colorado's unpredictable weather and short golf season make a home simulator an easy choice.

Along the Front Range, NOAA's summary describes warming that has been most pronounced in spring and summer since 2000, with 2012 the hottest year on record at 48.3°F on average (NOAA NCEI State Climate Summary). Mountain snow and Front Range snow are very different things, but spring snowstorms and short shoulder seasons still close courses on and off. A simulator in Denver, Boulder or Fort Collins mostly extends the season at both ends, which is why installers here talk about year-round practice rather than a single winter window.

Rooms Colorado installers work in

The Colorado firms listed here describe both basement and garage work. Discrete Integrations lists garages, basements and bonus rooms in Cherry Creek, Greenwood Village and Washington Park; Native Design Build pitches basement, garage and bonus-room conversions in Fort Collins; and Virtual Tee describes basement builds in established Denver neighborhoods and third-garage-bay conversions in newer suburbs south of the city.

Colorado-specific questions

In a Colorado basement, ask about the lowest beam or duct in the swing path, egress-window light washing out the projector, and radon fans or mechanical rooms that may limit where the screen can go.

What installation costs in Colorado

Installation pricing in Colorado follows the national pattern. As of October 2026, national services publish labor-only rates of about $5,000 to $10,000 per bay (Shop Indoor Golf and Indoor Golf Outlet list $4,999.99; Indoor Golf Essentials lists $7,000 standard and $10,000 custom), with equipment bought separately. The Colorado firms above generally quote whole rooms per project, and published design-build budgets run higher; one Minnesota builder cites $15,000 to $60,000 or more. See our installation cost guide for sources.

Questions to ask a Colorado installer

• Do you visit the site and measure before quoting, and is the site visit free?
• Which launch monitors, enclosures and screens do you install, and can you work with equipment I already own?
• Is the quote labor-only or does it include equipment, framing, electrical, turf and finishing?
• Who does electrical, framing or HVAC work, and are they licensed where required?
• Where exactly will the launch monitor and projector sit, and how much room is left behind and beside the golfer?
• How long does installation take, and what does calibration and training include?
• What support do you offer after installation, and who handles warranty claims on each component?
• Can I see photos or visit a completed build similar to my room?

How to choose

Start with the room, not the brand. Confirm your measurements against the launch monitor you want, then shortlist two or three companies whose stated service area covers your town. Local and regional firms can be easier to reach for service visits; national and multi-state companies may offer standardized packages and flat pricing. Compare written quotes line by line, check that each covers the same equipment and finish level, and ask how the installer handles a mis-measured ceiling or a projector that does not fit. If a company's website is the only source for a claim, confirm it with them directly before you sign.

FAQ

How do I find a golf simulator installer in Colorado?

This page lists 7 companies that say on their own websites that they design or install golf simulators in Colorado, each linked to its own website. Shortlist two or three whose stated service area covers your town and ask each for a site visit and written quote.

Who installs golf simulators in Denver and Boulder?

On the company sites we checked in October 2026: Discrete Integrations (Morrison) lists the Denver metro; Aurum Home Tech lists Denver, Boulder, Cherry Hills Village and Greenwood Village; and Assembled Golf and Virtual Tee have Denver pages. Native Design Build covers the Fort Collins area, and Assembled Golf also has a Colorado Springs page.

What should I check before building a golf simulator in a Colorado basement?

Measure to the lowest beam or duct in the swing path, check whether egress-window light will wash out the projector, and find radon fans or mechanical rooms that may limit where the screen can go. Discrete Integrations, Native Design Build and Virtual Tee all describe basement builds in Colorado.

How much does professional golf simulator installation cost?

As of October 2026, national installation services publish about $5,000 to $10,000 per bay in labor, with equipment extra. Local design-build firms usually quote complete rooms per project, and published project budgets run higher. See our installation cost guide for sources.

What should I measure before calling an installer?

Ceiling height at the hitting position, room depth and width, and the location of doors, windows, outlets, posts and ductwork. Compare them with the requirements of the launch monitor you plan to use.

Does YardageBay rank or rate these installers?

No. Installers are listed alphabetically within local/regional and national/multi-state groups, with no ratings and no paid placements. Each listing links to the source we checked.

Golf simulator installers in nearby states

Some companies cross state lines; installers based next door may cover your town. Arizona · Nebraska · Oklahoma · Utah

Related: installation cost · what a consultation covers · room fit calculator · build planner · garage setup · golf simulator packages · all states